Electric Ceramic Salt Pepper Mill to make your life more enjoyable!

Nowadays, Electric Ceramic Salt Pepper Mill products make kitchen life convenient for people. Today we will also explain how our products are used.

1. DISMANTLING

Grip around the body of the motor unit and turn the cover to move the pointer from lock to unlock. Lift the motor unit off the grinder. Remove the battery compartment by grasping around the motor unit top and body and turn to move the pointer from lock to unlock.

2. FIT BATTERIES

Fit 6 AAA batteries (not included) into each motor unit. The polarities (“+” &”-”) are marked on the battery compartment.

3. FILL THE GRINDER

Fill the grinder with peppercoms, sea salt, dried herbs or spices. Do not overfill: this causes problems during reassembly.

9551-4

4. ASSEMBLING

Refit the motor unit to the grinder by aligning the pointer with the unlock on the viewing window. Rotate the motor unit moving it into the lock position. Refit the battery compartment by aligning the pointer with the unlock on the motor unit. Rotate the battery compartment moving it into the lock position.

5. ADJUST THE GRIND

Tip the whole mill upside down and turn the grinder clockwise towards the negative for a finer grind.Do not turn the knob more than 6 complete rotations clockwise towards. This may unscrew the knob from the spindle.

6. USING THE MILL S

Hold the mill directly over food to be seasoned and press the switch. The motor will run while the switch is pressed. Release the switch to stop the motor.


Post time: May-14-2021